# Configure paths for GTK+
# Owen Taylor     97-11-3

dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
dnl
AC_DEFUN([AM_PATH_GTK],
[dnl 
dnl Get the cflags and libraries from the gtk-config script
dnl
AC_ARG_WITH(gtk-prefix,[  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)],
            gtk_config_prefix="$withval", gtk_config_prefix="")
AC_ARG_WITH(gtk-exec-prefix,[  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
            gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
AC_ARG_ENABLE(gtktest, [  --disable-gtktest       Do not try to compile and run a test GTK program],
		    , enable_gtktest=yes)

  if test x$gtk_config_exec_prefix != x ; then
     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
     if test x${GTK_CONFIG+set} != xset ; then
        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
     fi
  fi
  if test x$gtk_config_prefix != x ; then
     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
     if test x${GTK_CONFIG+set} != xset ; then
        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
     fi
  fi

  AC_MSG_CHECKING(for location of gtk-config script)
  AC_MSG_RESULT(${GTK_CONFIG})
  if test x${GTK_CONFIG+set} != xset ; then
    AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
  fi
  min_gtk_version=ifelse([$1], ,0.99.7,$1)
  AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
  no_gtk=""
  if test "$GTK_CONFIG" = "no" ; then
    no_gtk=yes
  else
    GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
    GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
    gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_gtktest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_CFLAGS"
      LIBS="$LIBS $GTK_LIBS"
dnl
dnl Now check if the installed GTK is sufficiently new. (Also sanity
dnl checks the results of gtk-config to some extent
dnl
      rm -f conf.gtktest
      AC_TRY_RUN([
#include <gtk/gtk.h>
#include <stdio.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.gtktest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtk_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If gtk-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    } 
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
               gtk_major_version, gtk_minor_version, gtk_micro_version);
        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
        printf("*** correct copy of gtk-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_gtk" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$GTK_CONFIG" = "no" ; then
       echo "*** The gtk-config script installed by GTK could not be found"
       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GTK_CONFIG environment variable to the"
       echo "*** full path to gtk-config."
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK test program, checking why..."
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK or finding the wrong"
          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GTK_CFLAGS)
  AC_SUBST(GTK_LIBS)
  rm -f conf.gtktest
])
# Configure paths for ESD
# Manish Singh    98-9-30
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor

dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS
dnl
AC_DEFUN([AM_PATH_ESD],
[dnl 
dnl Get the cflags and libraries from the esd-config script
dnl
AC_ARG_WITH(esd-prefix,[  --with-esd-prefix=PFX   Prefix where ESD is installed (optional)],
            esd_prefix="$withval", esd_prefix="")
AC_ARG_WITH(esd-exec-prefix,[  --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)],
            esd_exec_prefix="$withval", esd_exec_prefix="")
AC_ARG_ENABLE(esdtest, [  --disable-esdtest       Do not try to compile and run a test ESD program],
		    , enable_esdtest=yes)

  if test x$esd_exec_prefix != x ; then
     esd_args="$esd_args --exec-prefix=$esd_exec_prefix"
     if test x${ESD_CONFIG+set} != xset ; then
        ESD_CONFIG=$esd_exec_prefix/bin/esd-config
     fi
  fi
  if test x$esd_prefix != x ; then
     esd_args="$esd_args --prefix=$esd_prefix"
     if test x${ESD_CONFIG+set} != xset ; then
        ESD_CONFIG=$esd_prefix/bin/esd-config
     fi
  fi

  AC_PATH_PROG(ESD_CONFIG, esd-config, no)
  min_esd_version=ifelse([$1], ,0.2.7,$1)
  AC_MSG_CHECKING(for ESD - version >= $min_esd_version)
  no_esd=""
  if test "$ESD_CONFIG" = "no" ; then
    no_esd=yes
  else
    ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags`
    ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs`

    esd_major_version=`$ESD_CONFIG $esd_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    esd_minor_version=`$ESD_CONFIG $esd_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_esdtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $ESD_CFLAGS"
      LIBS="$LIBS $ESD_LIBS"
dnl
dnl Now check if the installed ESD is sufficiently new. (Also sanity
dnl checks the results of esd-config to some extent
dnl
      rm -f conf.esdtest
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <esd.h>

char*
my_strdup (char *str)
{
  char *new_str;
  
  if (str)
    {
      new_str = malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;
  
  return new_str;
}

int main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.esdtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_esd_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_esd_version");
     exit(1);
   }

   if (($esd_major_version > major) ||
      (($esd_major_version == major) && ($esd_minor_version > minor)) ||
      (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version);
      printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n");
      printf("*** to point to the correct copy of esd-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}

],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_esd" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$ESD_CONFIG" = "no" ; then
       echo "*** The esd-config script installed by ESD could not be found"
       echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the ESD_CONFIG environment variable to the"
       echo "*** full path to esd-config."
     else
       if test -f conf.esdtest ; then
        :
       else
          echo "*** Could not run ESD test program, checking why..."
          CFLAGS="$CFLAGS $ESD_CFLAGS"
          LIBS="$LIBS $ESD_LIBS"
          AC_TRY_LINK([
#include <stdio.h>
#include <esd.h>
],      [ return 0; ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding ESD or finding the wrong"
          echo "*** version of ESD. If it is not finding ESD, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means ESD was incorrectly installed"
          echo "*** or that you have moved ESD since it was installed. In the latter case, you"
          echo "*** may want to edit the esd-config script: $ESD_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     ESD_CFLAGS=""
     ESD_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(ESD_CFLAGS)
  AC_SUBST(ESD_LIBS)
  rm -f conf.esdtest
])
# Configure paths for IMLIB
# Frank Belew     98-8-31
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor

dnl AM_PATH_IMLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for IMLIB, and define IMLIB_CFLAGS and IMLIB_LIBS
dnl
AC_DEFUN([AM_PATH_IMLIB],
[dnl 
dnl Get the cflags and libraries from the imlib-config script
dnl
AC_ARG_WITH(imlib-prefix,[  --with-imlib-prefix=PFX   Prefix where IMLIB is installed (optional)],
            imlib_prefix="$withval", imlib_prefix="")
AC_ARG_WITH(imlib-exec-prefix,[  --with-imlib-exec-prefix=PFX Exec prefix where IMLIB is installed (optional)],
            imlib_exec_prefix="$withval", imlib_exec_prefix="")
AC_ARG_ENABLE(imlibtest, [  --disable-imlibtest       Do not try to compile and run a test IMLIB program],
		    , enable_imlibtest=yes)

  if test x$imlib_exec_prefix != x ; then
     imlib_args="$imlib_args --exec-prefix=$imlib_exec_prefix"
     if test x${IMLIB_CONFIG+set} != xset ; then
        IMLIB_CONFIG=$imlib_exec_prefix/bin/imlib-config
     fi
  fi
  if test x$imlib_prefix != x ; then
     imlib_args="$imlib_args --prefix=$imlib_prefix"
     if test x${IMLIB_CONFIG+set} != xset ; then
        IMLIB_CONFIG=$imlib_prefix/bin/imlib-config
     fi
  fi

  AC_PATH_PROG(IMLIB_CONFIG, imlib-config, no)
  min_imlib_version=ifelse([$1], ,1.8.2,$1)
  AC_MSG_CHECKING(for IMLIB - version >= $min_imlib_version)
  no_imlib=""
  if test "$IMLIB_CONFIG" = "no" ; then
    no_imlib=yes
  else
    IMLIB_CFLAGS=`$IMLIB_CONFIG $imlibconf_args --cflags`
    IMLIB_LIBS=`$IMLIB_CONFIG $imlibconf_args --libs`

    imlib_major_version=`$IMLIB_CONFIG $imlib_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    imlib_minor_version=`$IMLIB_CONFIG $imlib_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    imlib_micro_version=`$IMLIB_CONFIG $imlib_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_imlibtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $IMLIB_CFLAGS"
      LIBS="$LIBS $IMLIB_LIBS"
dnl
dnl Now check if the installed IMLIB is sufficiently new. (Also sanity
dnl checks the results of imlib-config to some extent
dnl
      rm -f conf.imlibtest
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <Imlib.h>

char*
my_strdup (char *str)
{
  char *new_str;
  
  if (str)
    {
      new_str = malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;
  
  return new_str;
}

int main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.imlibtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_imlib_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_imlib_version");
     exit(1);
   }

    if (($imlib_major_version > major) ||
        (($imlib_major_version == major) && ($imlib_minor_version > minor)) ||
	(($imlib_major_version == major) && ($imlib_minor_version == minor) &&
	($imlib_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'imlib-config --version' returned %d.%d, but the minimum version\n", $imlib_major_version, $imlib_minor_version);
      printf("*** of IMLIB required is %d.%d. If imlib-config is correct, then it is\n", major, minor);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If imlib-config was wrong, set the environment variable IMLIB_CONFIG\n");
      printf("*** to point to the correct copy of imlib-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}

],, no_imlib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_imlib" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$IMLIB_CONFIG" = "no" ; then
       echo "*** The imlib-config script installed by IMLIB could not be found"
       echo "*** If IMLIB was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the IMLIB_CONFIG environment variable to the"
       echo "*** full path to imlib-config."
     else
       if test -f conf.imlibtest ; then
        :
       else
          echo "*** Could not run IMLIB test program, checking why..."
          CFLAGS="$CFLAGS $IMLIB_CFLAGS"
          LIBS="$LIBS $IMLIB_LIBS"
          AC_TRY_LINK([
#include <stdio.h>
#include <Imlib.h>
],      [ return 0; ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding IMLIB or finding the wrong"
          echo "*** version of IMLIB. If it is not finding IMLIB, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means IMLIB was incorrectly installed"
          echo "*** or that you have moved IMLIB since it was installed. In the latter case, you"
          echo "*** may want to edit the imlib-config script: $IMLIB_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     IMLIB_CFLAGS=""
     IMLIB_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(IMLIB_CFLAGS)
  AC_SUBST(IMLIB_LIBS)
  rm -f conf.imlibtest
])

# Check for gdk-imlib
AC_DEFUN([AM_PATH_GDK_IMLIB],
[dnl 
dnl Get the cflags and libraries from the imlib-config script
dnl
AC_ARG_WITH(imlib-prefix,[  --with-imlib-prefix=PFX   Prefix where IMLIB is installed (optional)],
            imlib_prefix="$withval", imlib_prefix="")
AC_ARG_WITH(imlib-exec-prefix,[  --with-imlib-exec-prefix=PFX Exec prefix where IMLIB is installed (optional)],
            imlib_exec_prefix="$withval", imlib_exec_prefix="")
AC_ARG_ENABLE(imlibtest, [  --disable-imlibtest       Do not try to compile and run a test IMLIB program],
		    , enable_imlibtest=yes)

  if test x$imlib_exec_prefix != x ; then
     imlib_args="$imlib_args --exec-prefix=$imlib_exec_prefix"
     if test x${IMLIB_CONFIG+set} != xset ; then
        IMLIB_CONFIG=$imlib_exec_prefix/bin/imlib-config
     fi
  fi
  if test x$imlib_prefix != x ; then
     imlib_args="$imlib_args --prefix=$imlib_prefix"
     if test x${IMLIB_CONFIG+set} != xset ; then
        IMLIB_CONFIG=$imlib_prefix/bin/imlib-config
     fi
  fi

  AC_PATH_PROG(IMLIB_CONFIG, imlib-config, no)
  min_imlib_version=ifelse([$1], ,1.8.2,$1)
  AC_MSG_CHECKING(for IMLIB - version >= $min_imlib_version)
  no_imlib=""
  if test "$IMLIB_CONFIG" = "no" ; then
    no_imlib=yes
  else
    GDK_IMLIB_CFLAGS=`$IMLIB_CONFIG $imlibconf_args --cflags-gdk`
    GDK_IMLIB_LIBS=`$IMLIB_CONFIG $imlibconf_args --libs-gdk`

    imlib_major_version=`$IMLIB_CONFIG $imlib_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    imlib_minor_version=`$IMLIB_CONFIG $imlib_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    if test "x$enable_imlibtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GDK_IMLIB_CFLAGS"
      LIBS="$LIBS $GDK_IMLIB_LIBS"
dnl
dnl Now check if the installed IMLIB is sufficiently new. (Also sanity
dnl checks the results of imlib-config to some extent
dnl
      rm -f conf.imlibtest
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <gdk_imlib.h>

int main ()
{
  int major, minor;
  char *tmp_version;

  system ("touch conf.gdkimlibtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_imlib_version");
  if (sscanf(tmp_version, "%d.%d", &major, &minor) != 2) {
     printf("%s, bad version string\n", "$min_imlib_version");
     exit(1);
   }

    if (($imlib_major_version > major) ||
        (($imlib_major_version == major) && ($imlib_minor_version >= minor)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'imlib-config --version' returned %d.%d, but the minimum version\n", $imlib_major_version, $imlib_minor_version);
      printf("*** of IMLIB required is %d.%d. If imlib-config is correct, then it is\n", major, minor);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If imlib-config was wrong, set the environment variable IMLIB_CONFIG\n");
      printf("*** to point to the correct copy of imlib-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}

],, no_imlib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_imlib" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$IMLIB_CONFIG" = "no" ; then
       echo "*** The imlib-config script installed by IMLIB could not be found"
       echo "*** If IMLIB was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the IMLIB_CONFIG environment variable to the"
       echo "*** full path to imlib-config."
     else
       if test -f conf.gdkimlibtest ; then
        :
       else
          echo "*** Could not run IMLIB test program, checking why..."
          CFLAGS="$CFLAGS $GDK_IMLIB_CFLAGS"
          LIBS="$LIBS $GDK_IMLIB_LIBS"
          AC_TRY_LINK([
#include <stdio.h>
#include <gdk_imlib.h>
],      [ return 0; ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding IMLIB or finding the wrong"
          echo "*** version of IMLIB. If it is not finding IMLIB, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means IMLIB was incorrectly installed"
          echo "*** or that you have moved IMLIB since it was installed. In the latter case, you"
          echo "*** may want to edit the imlib-config script: $IMLIB_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     IMLIB_CFLAGS=""
     IMLIB_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GDK_IMLIB_CFLAGS)
  AC_SUBST(GDK_IMLIB_LIBS)
  rm -f conf.gdkimlibtest
])