[[project @ 1997-05-13 17:02:10 by jimb] jimb**19970513170221 Ignore-this: b137f182550fc9311d9aab06983df03c Make SCSH into a separate distribution. * configure.in: Use AM_INIT_AUTOMAKE, not AM_INIT_GUILE_MODULE. * Makefile.am: Don't use @module@ to decide where to install things. * README: Renamed from README.PORT. * INSTALL: New file; stock text. * install-sh, missing, mkinstalldirs: New files, used by automake-generated makefiles. * configure, Makefile.in, aclocal.m4: Regenerated. ] addfile ./INSTALL addfile ./README rmfile ./README.PORT addfile ./install-sh addfile ./missing addfile ./mkinstalldirs hunk ./INSTALL 1 +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, a file +`config.cache' that saves the results of its tests to speed up +reconfiguring, and a file `config.log' containing compiler output +(useful mainly for debugging `configure'). + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If at some point `config.cache' +contains results you don't want to keep, you may remove or edit it. + + The file `configure.in' is used to create `configure' by a program +called `autoconf'. You only need `configure.in' if you want to change +it or regenerate `configure' using a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes a while. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. You can give `configure' +initial values for variables by setting them in the environment. Using +a Bourne-compatible shell, you can do that on the command line like +this: + CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure + +Or on systems that have the `env' program, you can do it like this: + env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not supports the `VPATH' +variable, you have to compile the package for one architecture at a time +in the source code directory. After you have installed the package for +one architecture, use `make distclean' before reconfiguring for another +architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' can not figure out +automatically, but needs to determine by the type of host the package +will run on. Usually `configure' can figure that out, but if it prints +a message saying it can not guess the host type, give it the +`--host=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name with three fields: + CPU-COMPANY-SYSTEM + +See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the host type. + + If you are building compiler tools for cross-compiling, you can also +use the `--target=TYPE' option to select the type of system they will +produce code for and the `--build=TYPE' option to select the type of +system on which you are compiling the package. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Operation Controls +================== + + `configure' recognizes the following options to control how it +operates. + +`--cache-file=FILE' + Use and save the results of the tests in FILE instead of + `./config.cache'. Set FILE to `/dev/null' to disable caching, for + debugging `configure'. + +`--help' + Print a summary of the options to `configure', and exit. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--version' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`configure' also accepts some other, not widely useful, options. + hunk ./Makefile.am 5 -subpkgdatadir = $(pkgdatadir)/$(VERSION)/@module@ +subpkgdatadir = $(pkgdatadir)/$(VERSION)/scsh hunk ./Makefile.in 55 -module = @module@ hunk ./Makefile.in 58 -subpkgdatadir = $(pkgdatadir)/$(VERSION)/@module@ +subpkgdatadir = $(pkgdatadir)/$(VERSION)/scsh hunk ./Makefile.in 67 -mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs hunk ./Makefile.in 71 -DIST_COMMON = COPYING ChangeLog Makefile.am Makefile.in aclocal.m4 \ -configure configure.in +DIST_COMMON = README COPYING ChangeLog Makefile.am Makefile.in \ +aclocal.m4 configure configure.in install-sh missing mkinstalldirs hunk ./README 1 +This is an incomplete port of the scheme shell (scsh) 0.4.4 to Guile. + +The original scsh is available by ftp from +swiss-ftp.ai.mit.edu:/pub/su, which is also the place to go for scsh +documentation. + +The Guile port uses a record type to represent the multiple values +returned by many scsh procedures. The values can be retrieved +using call-with-values or receive. + +The Guile module system is not currently being used. Initialization +can be done by: + +(load-from-path "scsh/init") + +Note that SLIB must be found in %load-path, e.g., it can be unpacked +in the installed ice-9 directory. SLIB can be obtained by ftp from +prep.ai.mit.edu in the pub/gnu/jacal directory. hunk ./aclocal.m4 3 - -dnl Usage: AM_INIT_GUILE_MODULE(module-name) -dnl This macro will automatically get the guile version from the -dnl top-level srcdir, and will initialize automake. It also -dnl defines the `module' variable. -AC_DEFUN([AM_INIT_GUILE_MODULE],[ -. $srcdir/../GUILE-VERSION -AM_INIT_AUTOMAKE($PACKAGE, $VERSION, no-define) -AC_CONFIG_AUX_DIR(..) -module=[$1] -AC_SUBST(module)]) - hunk ./configure 607 -. $srcdir/../GUILE-VERSION +PACKAGE=guile hunk ./configure 609 -PACKAGE=$PACKAGE - -VERSION=$VERSION +VERSION=1.1a hunk ./configure 613 -echo "configure:616: checking whether build environment is sane" >&5 +echo "configure:614: checking whether build environment is sane" >&5 hunk ./configure 660 -echo "configure:663: checking for working aclocal" >&5 +echo "configure:661: checking for working aclocal" >&5 hunk ./configure 672 -echo "configure:675: checking for working autoconf" >&5 +echo "configure:673: checking for working autoconf" >&5 hunk ./configure 684 -echo "configure:687: checking for working automake" >&5 +echo "configure:685: checking for working automake" >&5 hunk ./configure 696 -echo "configure:699: checking for working autoheader" >&5 +echo "configure:697: checking for working autoheader" >&5 hunk ./configure 708 -echo "configure:711: checking for working makeinfo" >&5 +echo "configure:709: checking for working makeinfo" >&5 hunk ./configure 720 -echo "configure:723: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:721: checking whether ${MAKE-make} sets \${MAKE}" >&5 hunk ./configure 746 -ac_aux_dir= -for ac_dir in .. $srcdir/..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in .. $srcdir/.." 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - -module=scsh - hunk ./configure 747 -echo "configure:771: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:748: checking whether to enable maintainer-specific portions of Makefiles" >&5 hunk ./configure 918 -s%@module@%$module%g hunk ./configure.in 1 -# hunk ./configure.in 2 -# - hunk ./configure.in 3 -AM_INIT_GUILE_MODULE(scsh) +AM_INIT_AUTOMAKE(guile, 1.1a, no-define) hunk ./install-sh 1 +#! /bin/sh +# +# install - install a program, script, or datafile +# This comes from X11R5 (mit/util/scripts/install.sh). +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# Copyright 1991 by the Massachusetts Institute of Technology +# +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of M.I.T. not be used in advertising or +# publicity pertaining to distribution of the software without specific, +# written prior permission. M.I.T. makes no representations about the +# suitability of this software for any purpose. It is provided "as is" +# without express or implied warranty. +# +# This script is compatible with the BSD install script, but was written +# from scratch. +# + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +transformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +else + true +fi + +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + else + instcmd=mkdir + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + true + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + true + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + true + fi +fi + +## this sed command emulates the dirname command +dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' +' +IFS="${IFS-${defaultIFS}}" + +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + true + fi + + pathcomp="${pathcomp}/" +done +fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + true + fi + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + +# Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + +fi && + + +exit 0 hunk ./missing 1 +#! /bin/sh +# Common stub for a few missing GNU programs while installing. +# Copyright (C) 1996, 1997 Free Software Foundation, Inc. +# Franc,ois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +case "$1" in + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison touch file \`y.tab.c' + makeinfo touch the output file + yacc touch file \`y.tab.c'" + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing - GNU libit 0.0" + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + + aclocal) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. It should be needed only if + you modified \`acinclude.m4' or \`configure.in'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. It should be needed only if + you modified \`configure.in'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. It should be needed only if + you modified \`acconfig.h' or \`configure.in'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + touch config.h.in + ;; + + automake) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. It should be needed only if + you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print \ + | sed 's/^\(.*\).am$/touch \1.in/' \ + | sh + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. It should be needed only if + your modified any \`.y' file. For being effective, your + modifications might require the \`Bison' package. Grab it from + any GNU archive site." + touch y.tab.c + ;; + + makeinfo) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. It should be needed only if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + fi + touch $file + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and you do not seem to have it handy on your + system. You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequirements for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 hunk ./mkinstalldirs 1 +#! /bin/sh +# mkinstalldirs --- make directory hierarchy +# Author: Noah Friedman +# Created: 1993-05-16 +# Last modified: 1994-03-25 +# Public domain + +errstatus=0 + +for file in ${1+"$@"} ; do + set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` + shift + + pathcomp= + for d in ${1+"$@"} ; do + pathcomp="$pathcomp$d" + case "$pathcomp" in + -* ) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" 1>&2 + mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$? + fi + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + fi + + pathcomp="$pathcomp/" + done +done + +exit $errstatus + +# mkinstalldirs ends here